Withdrawal
1. Remove the cover, unscrew the nut and remove the wiper arm. Tightening torque: 28-32 Nm.
2. Remove the seal (1), remove six pistons (2) and remove the air intake cover (3).
3. Remove two screws, disconnect the connector (4) and remove the wiper. Tightening torque: 7-11 Nm
Installation
4. Installation is carried out in the reverse order of removal.
Adjustment
5. Install the wiper arms in accordance with the specified dimensions. Rated value: A = 38±5 mm; B = 32±5 mm.
6. Adjust the position of the windshield washer nozzles in accordance with the indicated dimensions (mm).