Manually controlled mirrors
For convenience, the outside rearview mirrors are equipped with remote control. They are adjusted using a control lever installed in the front lower part of the door glass.
Directions of movement of the lever for adjusting the position of the outside rearview mirror
Before you start driving, make sure you have a good view behind you on the left and right sides and directly behind the vehicle.
Warning! Do not scrape off frost from the mirror, as this may damage the mirror surface. If ice interferes with the movement of the mirror, do not try to remove it by force. Use aerosol de-icers, a sponge or a cloth soaked in warm water.
External rear view mirrors with remote control
The outside rearview mirrors can be adjusted in any direction to provide maximum rear visibility. The switch can be used to adjust the positions of both the right and left mirrors. To adjust the mirror position, follow these steps:
1. Move the selection lever to the right or left to activate the adjustment mechanism of the corresponding mirror.
2. After that, adjust the angle of the mirror by pressing the corresponding side of the switch button as shown in the figure.
Warning! Do not scrape off frost from the mirror, as this may damage the mirror surface. If ice interferes with the movement of the mirror, do not try to remove it by force. Use aerosol de-icers, a sponge or a cloth soaked in warm water.
Warning! The right outside mirror is convex. Objects seen in the mirror are actually closer than they appear.
Warning! When changing lanes, use the interior rearview mirror located inside the vehicle or look directly to determine the actual distance to the vehicles behind you.