Checking the technical condition
1. Turn on the ignition.
2. Apply a stream of variable temperature air to the sensor through the air inlet. Measure the resistance of the sensor between terminals 1 and 2.
1. Mass
2. Sensor signal
Note: Specifications:
The interior temperature sensor is an NTC thermistor. As the temperature decreases, the resistance increases and vice versa.
Replacement
1. Disconnect the negative battery terminal.
2. Remove the right center deflector and disconnect the connector (A) interior temperature sensor.
3. Remove the sensor (IN) temperature in the cabin from the central deflector.
4. Install in the reverse order of removal.