2. Remove the flange washer (A).
3. Remove the sealing cuff (A).
4. Using the special tool (A), remove the flange (B) from the coupling (C).
5. Using a special tool, press out the flange seal (A).
6. Remove the clutch cover assembly (a).
7. Remove the sealing cuff (A) of the coupling cover.
8. Remove the retaining ring.
9. Loosen the nuts securing the electric coupling.
10. Remove the snap ring (B) that secures the rear plate (A) and secondary clutch assembly.
11. Remove the retaining ring (A).
12. After removing the sealing cuff, remove the retaining ring (A).
13. Using the special tool, remove the rear plate and secondary clutch assembly (A).
14. Remove the back plate (A) from the input shaft.
15. Remove the plates and disks.
16. Remove the reinforcement (A).
17. Remove the input shaft (A).
18. Remove the steel balls (A).
19. Remove the main cam (A).
20. Remove the thrust washer (A).
21. Remove the thrust bearing ring (A).
22. Remove the retaining ring (A).
23. Remove the primary clutch disc (A).
24. Remove the primary clutch plate (A).
