2. Remove the battery.
3. Remove the battery tray.
4. Remove the air filter assembly.
5. Remove the intercooler inlet pipe (intermediate cooling radiator).
6. Disconnect the plug (A) from the automatic transmission.
7. Disconnect the ground wire.
8. Loosen the nut (B) securing the hydraulic drive working cylinder (A).
9. Remove the retainer (B) of the hydraulic drive working cylinder (A).
10. Loosen the hose clamps (A) of the automatic transmission cooling system.
11. Using a special device, lift the engine.
12. Loosen the gearbox bracket mounting bolts (A).
 |
 |
13. Loosen the upper gearbox mounting bolts (A).
14. Loosen the bolts securing the gearbox to the subframe.
15. Raise the car.
16. Unscrew the drain plug (A) and drain the oil.
17. Support the gearbox with a jack.
18. Loosen the steering gear mounting bolts.
19. Remove the drive shafts.
20. Loosen the bolt (A) securing the automatic transmission to the rear of the subframe.
21. Remove the lower support. If the vehicle is all-wheel drive, the cardan shaft must first be removed.
22. Loosen the lower gearbox mounting bolt (A).
23. Remove the gearbox assembly.
24. Installation is carried out in the reverse order of removal.