Automatic transmission control (Hyundai Elantra XD)

Examination

1. Check the retainer for wear.

2. Check the bushing for wear or damage.

3. Check the spring for damage and loss of elasticity.

4. Check the cam at the end of the rod for wear.

The article is borrowed from an online resource: www.hyundaibook.ru

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Elantra 3: Automatic gearbox

Removal and installation of gearbox A4AF3
Removal and installation of the F4A42 gearbox
Replacing the drive shaft oil seal ring
Adjusting the pressure in the line (A4AF3)
Adjusting the forced downshift servo (A4AF3)

Installing a blocking device
Installing a key lock device

We recommend other articles on the topic of Hyundai manuals:

Automatic transmission and ignition switch control system Hyundai Accent 1 (1994-1999)
Automatic transmission selector lever — removal Hyundai Getz (2002-2011)
Electrical diagram of the automatic transmission control system Hyundai Sonata 4 (2001-2012, petrol)
Table 3.15. Troubleshooting by pressure values in the automatic… Hyundai Santa Fe 2 (2007-2012, petrol)
Automatic transmission — device Hyundai Tucson 1 (2005-2010)
Table 3.10. Checking the pressure in the automatic transmission… Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet

Elantra 3 (2000-2006)