Locking the doors
1. Close all doors.
2. Press the button «LOCKED» remote control.
3. This will lock all doors at the same time and flash the direction indicators once to confirm that the system is on.
Unlocking doors
1. Press the button «UNLOCKED» PDU.
2. This unlocks all doors at the same time and flashes the direction indicators twice to confirm that the system is off.
Replacing the remote control battery
When the degree of charge of the remote control battery decreases, when unlocking or locking the doors, you have to press the buttons on the remote control several times, and the control lamp of the remote control goes out. In this case, replace the battery as soon as possible.
Battery type: CR2032.
To replace the battery:
1. Use a screwdriver to carefully pry off the remote control housing as shown in the figure.
2. Remove the used battery, noting its polarity. Insert a fresh battery, making sure the polarity is correct (his «positive» side should be facing down).