Contents: Door molding ⇓ Roof molding ⇓
Door molding
Using special tool 09800-21000, starting at either end of the molding, separate it from the front and rear doors.
Caution: Be careful not to scratch the doors.
Roof molding
1. Using a screwdriver blade as a lever, separate the end of the roof molding as shown in the picture.
Caution: To prevent damage to the roof, wrap the screwdriver blade in a cloth. Be careful not to scratch the body.
2. Pull and remove the roof molding.
3. Installation is carried out in the reverse order of removal.
Caution: Replace damaged clamps if necessary.