Warning! Remove the trunk lid with an assistant.
Removal and installation
1. Turn out bolts of fastening of the hinge of a cover of a luggage carrier and remove a cover of a luggage carrier.
2. Remove the torsion bar using wrench 09861-22000 as shown.
3. Remove the trunk lid latch and trunk lid lock.
4. Installation is carried out in the reverse order of removal.
Adjustment
1. Adjust the position of the impact plate by moving it down or to the right or left so that the rear of the trunk lid is flush with the adjacent surfaces.
2. Adjust the trunk hinges by moving them down or to the right or left so that the front of the trunk lid is flush with the adjacent surfaces.
3. Turn the boot lid stops to one side or the other to adjust the boot lid installation height.