Attention! Remove and install Hyundai Getz tailgate with an assistant.
Removal and installation
1. Remove the gas-filled tailgate support strut.
2. Disconnect sockets from a heater of back glass.
3. Turn out bolts of fastening of loops and remove a tailgate
4. Installation is carried out in the reverse order of removal.
Tailgate upholstery
1. Turn out four screws of fastening of an upholstery of a door of a luggage space.
2. Use a puller to release the latches securing the upholstery of the tailgate.
3. Installation is carried out in the reverse order of removal.
Rear window cleaner
1. Remove an upholstery of a door of a luggage compartment.
2. Turn away a nut and remove the lever with a glass cleaner brush.
2. Disconnect draft from an electric drive, turn out bolts and remove an electric drive and the cylinder of the lock. When removing the lock switch, turn it slightly to the side.
4. Turn out three bolts and remove the lock.
5. Installation is carried out in the reverse order of removal.
4. Installation is carried out in the reverse order of removal.
Tailgate Adjustment
1. Adjust the position of the latch by moving it up and down or left and right so that the back of the tailgate is flush with the adjacent surfaces.