Attention! Remove and install the Hyundai Getz hood with an assistant.
Withdrawal
1. Disconnect the windshield washer hose from the jet and release the hose clamp.
2. Turn out bolts of fastening of loops and remove a cowl.
Installation
Installation is carried out in the reverse order of removal.
Hood adjustment
1. Loosen the hood hinge bolts. By moving the hood up and down and left and right, adjust its position so that when the hood is closed, the gap around the hood perimeter is the same on all sides. After adjustment, tighten the hood hinge bolts.
2. Check that the rubber buffers support the front of the hood when the hood is closed. Otherwise, adjust the height of the rubber buffers by turning them in the appropriate direction.