Bonnet adjustment points.
1 - adjustment of the hood height, 2 - adjustment of the hood lock position, 3 - adjustment of the hood position.
Adjusting the hood position
1. Loosen the hood mounting bolts and, by moving the hood in the oval holes of the hinges, adjust the longitudinal and transverse position of the hood so that the gap on all sides is the same.
- Tightening torque: 22-27 Nm
2. Adjust the height of the hood by turning the rubber hood cushions clockwise or counterclockwise.
3. Loosen the hood lock mounting bolts.
- Tightening torque: 7-9 Nm
4. Adjust the hood lock position so that it securely holds the hood closed, then tighten the lock mounting bolts. If the hood lock position cannot be adjusted correctly, adjust the longitudinal and transverse position of the hood again.
