Car front suspension Hyundai Sonata 3

Front suspension specifications
Suspension type - MacPherson struts, with anti-roll bar Shock absorber type - Hydraulic, double acting Maximum length - 510 mm + 3 mm Length in compressed state - 356 mm...

Tightening torque
Upper strut mounting nut - 40-50 Self-locking nut for mounting the rack - 60-90 Fastening the rack to the hinge - 90-105 Self-locking nut for fastening the stabilizer...

Lubricating fluids
Knot Recommended lubricant Front wheel bearing SAE J310a General Purpose Grease NLGI-2 or equivalent Lower arm ball joint Consistent Valiant R-2 or POLY LUB GLY 801 K In...

Possible malfunctions

Installing the front wheels
Place the car on a level surface with the wheels in a straight position. Wheel alignment Toe-in (B-A or angle) is adjusted by turning the transverse tie rod clamps....

General view of the suspension

Suspension strut

Lower arm
Checking ball joints 1. Fit the ball joint to the lower control arm assembly. 2. Secure the stabilizer bar with a wrench (12.7mm), then install the self-locking nut. 3....

Crossmember. Crossmember bushing replacement
Replacing the crossmember bushing 1. Use the special tool to remove and press bushings A and B. 2. Press bushings A and B so that the inner sleeve comes out. Standard...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Chassis: Front suspension Hyundai Accent 3 (2005-2010)
Chassis: Front suspension Hyundai Elantra 2 (1995-2000, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code