Vehicle intake and exhaust system Hyundai Sonata 3

Twin Cam Engine Specifications
Technical specifications Air purifier: Type - With dry filter element Filter element - Non-woven type Exhaust pipe: Muffler - Expansion type with resonator Suspension...

Twin Cam Engine Tightening Torques
Tightening torques for threaded connections, Nm Air cleaner mounting bolts - 8-10 Resonator mounting bolt - 8-10 Bolts securing the throttle body to the intake manifold...

Twin Cam Engine — Malfunctions

Twin Cam Engine — Air Cleaner — Removal, Check, Installation
Removal 1. Remove the air intake hose, the air duct connected to the air cleaner and the resonator. 2. Remove the three air cleaner bolts. 3. Remove the air cleaner. 4....

Twin Cam Engine — Intake Manifold

Twin Cam Engine — Exhaust Manifold

Twin Cam Engine — Silencer

Single Camshaft Engine — Specifications, Faults
Technical specifications Exhaust pipe: Muffler - Expansion type with resonator Suspension system - Rubber brackets Malfunctions

Single Cam Engine — Tightening Torque
Intake manifold to cylinder head - 15-20 Exhaust manifold to cylinder head - 15-20 Oxygen sensor to the exhaust manifold (for cars running on unleaded gasoline) - 40-50...

Single Cam Engine — Receiver and Intake Manifold — Removal and Installation
Intake manifold 1. Check the manifold for defects or cracks. 2. Check the coolant and air passages for leaks. Clean the passages if necessary. 3. Check the straightness...

Single Cam Engine — Exhaust Manifold — Check
Examination 1. Check the manifold for damage and cracks. 2. Using a square and feeler gauge, check the deformation of the surface of the cylinder head mating with the...

V6 Engine — Tightening Torques
Air cleaner mounting bolts - 8-10 Nuts for fastening the intake manifold to the cylinder head - 15-20 Receiver mounting bolts - 10-13 Exhaust manifold to cylinder head...

V-shaped six-cylinder engine (V6) — malfunctions

V6 Engine — Air Cleaner — Removal, Check and Installation
Technical specifications Air purifier: Type - With dry filter element Filter element - Non-woven type Exhaust pipe: Muffler - Expansion type with resonator Suspension...

V6 Engine — Air Receiver — Removal, Checking and Installation
Removal 1. Disconnect the air intake hose from the throttle body. 2. Remove the accelerator drive cable. 3. Remove the engine cooling system hose and throttle body. 4....

V6 Engine — Intake Manifold — Removal, Inspection and Installation
Removal 1. Remove the receiver. 2. Remove the high pressure fuel hose. Caution: Before disconnecting the high-pressure hose, it is necessary to relieve the internal fuel...

V-6 Engine — Exhaust Manifold

V6 Engine — Silencers — Removal, Inspection and Installation
Removal Main muffler. Caution: Allow exhaust system components to cool to a safe level before removing them. 1. Disconnect the main muffler from the center pipe. 2....

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Add to social network:

Link in different formats to this section

TextHTMLBB Code