Specifications
Air cleaner:
- Type - With dry filter element
- Filter element - Non-woven type
Exhaust pipeline:
- Silencer - Expansion type with resonator
- Suspension System - Rubber Brackets
Removal, check and installation
1. Remove the air inlet hoses associated with the air cleaner.
2. Remove the three bolts securing the air cleaner housing.
3. Remove the air cleaner.
4. Remove the flow sensor from the air cleaner housing.
5. Check the body, cover or gasket of the air cleaner for deformation, corrosion or other defects.
6. Check the air duct for defects.
7. Check the air cleaner element for capacity, contamination or damage. If it has a reduced capacity, remove dust and other contaminants by blowing compressed air from the inside of the filter element. Replace the element if it is difficult to clean.
8. Installation of the air cleaner is carried out in the reverse order.