Contents: Removal ⇓ Installation ⇓
Removal
1 Fold the rear seat forward.
2. Remove the fuel pump cover (1).
3 Disconnect the fuel pump wiring connector (2).
4. Start the engine and wait until the fuel supply line is empty. After the engine stalls, turn off the ignition.
5. Disconnect the fuel hose (3) and the absorber hose (4) from the pump. Unscrew the screws (5) and remove the fuel pump. Tightening torque: 2-3 Nm.
Installation
6. Installation is carried out in reverse order.