1. Self-locking nut; 2. Holder; 3. Support; 4. Cap; 5. Buffer compression; 6. Anther; 7. Shock absorber
Withdrawal
1. Remove the rear wheel. Nut tightening torque: 90-110 Nm.
2. Jack up the beam and unscrew the screw (1) lower shock absorber. Tightening torque: 100-120 Nm.
3. Unscrew the shock absorber top screws (2). Tightening torque: 40-60 Nm.
Installation
4. Installation is carried out in the reverse order of removal.