1. Rear suspension beam
2. Brake drum
3. Hub assembly
4. Brake disc
5. Screw
6. Wheel
7. Wheel nut
Withdrawal
1. Remove rear wheels. Nut tightening torque: 90-110 Nm.
2. Loosen the screws of the wheel speed sensor bracket (1) and brake hose (2). Tightening torque: 7-11 Nm (screw 1), 9-14 Nm (screw 2).
3. Remove the brake caliper (3) and attach it to the body. Screw tightening torque: 65-75 Nm.
4. Remove the screw and remove the brake disc (4).
5. Loosen the screws (5) hub node. Tightening torque: 50-60 Nm.
6. Remove hub assembly (6).
Installation
7. Installation is carried out in the reverse order of removal.