Warning: Be careful when changing engine oil as the oil is hot and may cause burns.
Execution order
1. Warm up the engine to normal operating temperature and turn it off.
2. Install a tray to collect any leaked oil.
3. Remove the oil filler cap and unscrew the oil drain plug from the oil pan. Wait until all the oil has drained from the oil pan.
4. Screw in the oil drain plug with a new gasket.
Tightening torques: 35–45 Nm
5. Fill the engine with the required amount of the required motor oil.
Engine oil capacity:
- Without oil filter change: 3.0 l
- With oil filter change: 3.3 l
6. Install the cap on the oil filler neck.
7. Start the engine and check for oil leaks.
8. Check the engine oil level and top it up if necessary.