1 - bolt, 30–40 Nm; 2 - gasket; 3 - catalytic converter; 4 – central muffler; 5 – main muffler; 6 - suspension; 7 – nut, 30–40 Nm; 8 - bolt, 40–60 Nm; 9 - receiving exhaust pipe; 10 - oxygen sensor; 11 - catalytic converter.
Withdrawal
Main silencer
Warning! Before removing or inspecting the components of the exhaust system, make sure that it has cooled down sufficiently.
1. Disconnect the silencer from the center pipe.
2. Remove the rubber hangers and remove the main muffler from the vehicle.
Central pipe
1. Separate the center muffler from the front exhaust pipe.
2. Remove the rubber hangers and remove the center muffler from the vehicle.
Catalytic converter
1. Remove the catalytic converter from the front exhaust pipe.
2. Remove the catalytic converter from the cylinder head.
Exhaust pipe
1. Disconnect the connector from the oxygen sensor.
2. Separate the front exhaust pipe from the catalytic converter or exhaust manifold.
3. Remove the front exhaust pipe clamp bolt and the center muffler mounting nut.
Examination
1. Check mufflers and pipes for corrosion and damage.
2. Check rubber hangers for aging and cracks.
Installation
1. Temporarily install the catalytic converter, exhaust pipe, center and rear muffler assembly.
2. Reliably tighten all connections of elements of system of release of the fulfilled gases. When moving the exhaust system of the car to the sides, check that it does not touch the car body. If not, replace the exhaust rubber mounts.