Order of execution
1. Set the selector lever to position «N».
2. On the transmission side, loosen the control cable-to-lever nut to release the cable and control lever.
3. Set the selector lever to the neutral position.
4. Loosen the transaxle range switch housing mounting bolts, then rotate the transaxle range switch housing to align the hole at the end of the control lever and the hole in the lug of the transaxle range switch housing.
5. Tighten the transaxle range switch housing mounting bolts to specification. Be careful not to dislodge the switch housing when tightening the bolts.
6. Gently push the transmission control cable in the direction of the arrow and then tighten the adjusting nut.
7. Check that the selector lever is in position «N».
8. Check up operation and functioning of the switch for each position of the selector lever.