Order of execution
1. Relieve pressure in the fuel system as follows.
- open the trunk and disconnect the connector from the fuel pump;
- start the engine and let it run until it stops due to lack of fuel in the fuel distribution line. As a result of the actions taken, the pressure in the fuel system was relieved;
- turn off the ignition;
- disconnect the wire «masses» from the storage battery;
e. connect the fuel pump connector.
2. Turn out screws of fastening of clips of tubes of the fuel filter.
Warning! Cover the fuel filter with a towel to prevent splashing of fuel caused by residual pressure in the fuel line.
3. Turn out bolts of fastening of the fuel filter and remove it from an arm.
4. After replacing the fuel filter, check the tightness of the fuel system.