The following are instructions for replacing lamps. Replace burnt out lamps only with lamps of the same type and power.
Attention: Do not allow oil products to come into contact with lamps (oil, gasoline, etc.).
Replacing headlight and front turn signal bulbs
1. Let the lamp cool down. Wear safety goggles.
2. Hold the lamp by the plastic base, do not touch the glass bulb with your hands.
3. Disconnect the power cable from the back of the plastic base on the back of the headlight.
4. Press on the bulb spring to remove it.
5. Remove the protective cap from the bulb being replaced and install the new bulb, aligning the plastic bulb base with the headlamp hole. Fasten the lamp spring, install the protective cover and connect the power cable.
6. When disposing of the old lamp, use the protective cap and carton.
7. Check up correctness of adjustment of a beam of light of a headlight.