Removal
1. Remove the bushing and accelerator cable from the accelerator pedal side.
2. Loosen the accelerator lever bracket bolts and remove it.
Examination
1. Check the inner and outer cables for damage.
2. Check the smooth movement of the cable.
3. Check if the accelerator lever is bent.
4. Check if the return spring is stretched.
5. Make sure the bushing is inserted so that it covers the metal edges.
Installation
1. When installing the return spring and throttle lever, apply specified multi-purpose grease around each moving part of the throttle lever.
2. Place the semi-dry type seal into the mounting hole, and then tighten the accelerator lever bracket.
Tightening torque
Accelerator lever bracket bolts - 8-12 Nm