Removal and installation the seat position sensor (Hyundai Accent MC)

Removal

Caution: After disconnecting the battery terminal, wait at least 3 minutes.

1. Disconnect the wire from the negative terminal of the battery.

2. Remove the front seat

3. Remove the two screws, disconnect the connector and remove the seat position sensor.

3. Remove the two screws, disconnect the connector and remove the seat position…

Installation

4. Installation is carried out in the reverse order of removal.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Accent 3: Interior (internal elements)

Removal and installation the side impact sensor
Removal and installation the front impact sensor
Removal and installation the seat belt pretensioner
Removal and installation the upper airbag
Removal and installation side airbag

Removal and installation the passenger presence sensor

We recommend other articles on the topic of Hyundai manuals:

Throttle Position Sensor (TPS) — Check Hyundai Elantra 1 (1990-1995, petrol)
Camshaft Position (CMP) Sensor Hyundai Getz (2002-2011)
Adjusting the throttle position sensor (2.0L / 2.4L engines) Hyundai Sonata 4 (2001-2012, petrol)
Rear seat armrest Hyundai Santa Fe 2 (2007-2012, petrol)
Crankshaft position sensor for gasoline engine Hyundai Tucson 2 (2009-2015)
Throttle position sensor Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet