1 - bolt, 8–10 Nm; 2 – the switch of blocking of the lock of ignition; 3 - return spring; 4 - clutch pedal bracket; 5 - nut, 19–28 Nm; 6 - bushing; 7 - clutch pedal; 8 - clutch pedal pad.
Withdrawal
1. Remove cotter pin, washer and pin with head and cotter pin hole.
2. Turn out a bolt of fastening of a pedal of coupling.
Examination
1. Check the pedal arm and bushing for wear.
2. Check the clutch pedal for bending or deformation.
3. Check the return spring for damage and loss of elasticity.
4. Check the clutch pedal pad for damage or wear.
5. Check the continuity between the contacts of the ignition lock switch.
Installation
1. Install the parts in the reverse order of removal.
2. Lubricate the bushing, pin, washer and head pin with cotter pin before installation.
3. Install the pushrod to the clutch pedal.
4. Adjust the length of the pusher.