Sign | Probable cause | Method of elimination | |
| Clutch slippage The car does not accelerate when the engine speed increases Insufficient vehicle speed Lack of power on climbs | Insufficient clutch pedal clearance | Adjust the clutch pedal clearance | |
| Clogged hydraulic clutch drive | Clean or replace parts | ||
| Excessive wear of the clutch disc | Replace the clutch disc | ||
| The disc is jammed on the splines of the input shaft or oil is on the friction linings | Replace the clutch disc | ||
| The pressure plate or flywheel is damaged | Replace the pressure plate or flywheel | ||
| The diaphragm spring is weak or broken | Replace the pressure plate | ||
| Difficulty shifting gears | Excessive clutch pedal clearance | Adjust the clutch pedal clearance | |
| Fluid leak from the hydraulic clutch drive | Locate the leak and fix it | ||
| Clutch disc wear or corrosion | Replace the clutch disc | ||
| Excessive distortion of the clutch disc | Replace the clutch disc | ||
| Clutch noise | When the clutch is not used | Insufficient clutch pedal clearance | Adjust the clutch pedal clearance |
| Excessive wear of the clutch disc | Replace the clutch disc | ||
| Noise appears after clutch disengagement | Worn or damaged clutch release bearing | Replace the clutch release bearing | |
| Noise when disengaging the clutch | Lack of lubrication on the surface of the support bushing | Lubricate the surface of the bearing sleeve | |
| The clutch release bearing is not installed properly | Repair it | ||
| Noise appears when driving with the clutch partially engaged | The guide bushing is damaged | The guide bushing is damaged | |
| The clutch pedal is difficult to press | Insufficient clutch pedal lubrication | Repair it | |
| Not enough grease on the clutch disc splines | Repair it | ||
| Not enough lubrication on the clutch release shaft lever | Repair it | ||
| Not enough grease on the front bearing cover | Repair it | ||
| Gears shift with difficulty or do not shift at all | Insufficient clutch pedal clearance | Adjust the clutch pedal clearance | |
| The clutch release cylinder is faulty | Repair or replace | ||
| Excessive clutch disc runout | Repair or replace | ||
| The splines of the input shaft of the gearbox are dirty or rusty | Repair it | ||
| The clutch pressure plate is faulty | Replace the clutch pressure plate | ||
| Clutch slippage | Insufficient clutch pedal clearance | The clutch pressure plate is faulty | |
| Clogged hydraulic clutch drive | The clutch pressure plate is faulty | ||
| Clutch disc wear | Replace the clutch disc | ||
| The clutch pressure plate is faulty | Replace the clutch pressure plate | ||
| The clutch pressure plate is faulty | Repair it | ||
| Clutch vibration | The clutch disc is warped, worn out or has oil on it | Check the clutch disc | |
| The clutch pressure plate is faulty | Replace the clutch pressure plate | ||
| The diaphragm spring is damaged or broken | Replace the pressure plate | ||
| The clutch disc damper spring is damaged | The clutch mount is loose | ||
| The clutch mount is loose | Repair it | ||
| Clutch noise | The clutch pedal bushing is damaged | Replace the clutch pedal bushing | |
| The fastening in the clutch housing is loose | Repair it | ||
| Clutch release bearing is worn or dirty | Replace the clutch release bearing | ||
| The clutch release fork mount is broken | Repair it | ||
The original can be found on the resource hyundaibook