1. Remove the stop pins (B) by pressing on the stops (C). Disconnect the upper return spring (A).
3. Disconnect the lower return spring (B) from the brake shoes (A). Make sure the slave cylinder dust boots are intact.
4. Disconnect the parking brake cable from the lever.
5. Remove the brake pads.
6. Completely disconnect the upper return spring (C) and the clearance adjuster (D) from the pads.
7. Disconnect the brake line (A) from the slave cylinder (B).
8. Loosen the fastening bolt (C) of the working cylinder and disconnect the working cylinder from the drum brake return plate (D).