- 1. Adjust the pressure in all tires.
- 2. Place the car on a level surface at a distance of 3 meters from the wall where the headlights will be directed. Press the front of the car several times to ensure that the suspensions are set in the correct position.
- 3. The vehicle must be loaded as it is usually loaded during operation.
- 4. Turn on the low beam headlights.
- 5. Open the hood.
- 6. Draw another horizontal line below the horizontal line at a distance of 30 mm from the first horizontal line.
- 7. Using a screwdriver, adjust the position of the upper edge of the light spot so that it coincides with the lower of the horizontal lines.
- 8. Using a screwdriver, adjust the position of the light beam so that the right edge of the horizontal section of the upper border of the light spot of each headlight coincides with the vertical line for the corresponding headlight.
 |
"H" Horizontal center line of headlights (distance from ground - 665 mm) "W" Distance between headlight centers 1170 mm "L" Distance from headlights to wall: 3000 mm |