Removal and installation the seat back (Hyundai Accent MC)

Removal

1. Remove the screws and the backrest tilt adjustment lever (1) and the seat cushion height adjustment knobs (2). Remove the left seat trim (3).



2. Remove the screws and remove the right seat trim (4).



3. Disconnect the side airbag connector (5).



4. Loosen the hinge screws and remove the backrest (6) from the seat adjustment mechanism (7).

Note: If replacing the seat back, remove the side airbag and install it on the new seat back.

Installation

5. Installation is carried out in the reverse order of removal.