Back seat (Hyundai Tucson JM)

Backrest tilt adjustment

To adjust the angle of the seat back, pull the seat back release handle, set the seat back to the desired position and release the handle.

Once you have achieved the desired backrest angle, make sure it is securely fixed.

Folding the backrest and cushion of the rear seat

For added convenience, the rear seat backrest and cushion can be completely folded by moving them.



1. Fold the seat back down by pulling the release handle.





2. Make sure the backrest is securely fixed in this position by clicking it.

Note.

• Before folding the seatback, place the rear seat belt buckles in the seatback pockets. If you do not do this, they may end up under the seat cushion when it is folded to its normal position.
• The tongues of the belts should be removed from the locks by pressing the lock button.

3. To fold the rear seat back to its normal position, repeat the above steps in reverse order by pulling the seat lock handle.

After folding the rear seat to its normal position, make sure it is securely locked by pulling on the top of the seat back.

Precautions when using the rear seat

For the safety of all occupants of the vehicle, place luggage or other cargo no higher than the back of the rear seat.