Front seats (Hyundai Tucson JM)

Adjusting the seat position in the longitudinal direction

To move the seat longitudinally, pull up on the locking handle. This will unlock the seat from the runners and allow it to be moved forward or backward to the desired position. Then release the locking handle and slightly slide the seat forward or backward along the runners until the lock clicks into place.

Adjusting the seat backrest tilt

To obtain the desired seat back angle, relieve the load by leaning forward and pulling up on the seat back angle adjustment handle located on the outside of the seat cushion. Then set the seat back to the desired angle by pressing down on it with your back. Lock the seat back by releasing the seat back angle adjustment handle.

Adjustable seat headrests

Head restraints reduce the risk of neck injuries. To raise the head restraint, pull it up, and to lower it, press the lock button down. To remove the head restraint, lift it all the way up and remove it from the seat back by pressing the lock button.

Seat cushion height adjustment (driver's seat only)

To raise or lower the front of the seat cushion, rotate the front handle toward the front or rear of the vehicle. To raise or lower the rear of the seat cushion, rotate the rear handle toward the front or rear of the vehicle.

Folding the seat into a table

The front passenger seat folds down to form a table.

The folded back of the front seat is a convenient place to store a laptop, etc.

To fold the seat into a table:

1. Lower the seat headrest as far as it will go.

2. Pull up on the backrest tilt adjustment handle and fold the backrest forward to a horizontal position.

3. When setting the backrest to its normal position, make sure it is securely fixed.

Pull-out storage box (additional equipment)

The sliding storage box is located under the front passenger seat. To open the box, pull it up and forward.



The full version is located on the website [HYUNDAIBOOK.ru]

Heated seats (optional)

The front seat heating system is used in cold weather. To turn on the heating, turn the ignition key to the "ON" position and press the driver or passenger seat heating switch. In warm weather or when seat heating is not needed, the switches should be in the off position.

Note:

• Seat heating does not switch on at an ambient temperature of 28°C ±3.5°C.
• If the heated seats do not turn on when the ambient temperature is below 24°C, have the system checked by an authorized dealer.