Adjusting the axial clearance of the underdrive sun gear (F4A42) (Hyundai Elantra XD)

Install the thrust bearing ring *8 and rear cover.

Measure the axial clearance of the underdrive sun gear. Replace thrust bearing ring *8 to adjust clearance to standard value. Axial clearance: 0.25–0.45 mm.

Caution: Installing the underdrive clutch sleeve will make it easier to measure…

Caution: Installing the underdrive clutch sleeve will make it easier to measure the underdrive sun gear axial clearance.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Elantra 3: Automatic gearbox

Adjusting the Low and Reverse Brake Axial Clearance (F4A42)
Adjusting the axial clearance of the second gear brake (F4A42)
Adjusting the axial clearance of the reaction brake (F4A42)
Diagnostic codes
Diagnostic function

Differential Preload Adjustment (F4A42)
Elements of the hydraulic control system
Identification of bearings of automatic transmission F4A42
Malfunction Indicator Lamp (MIL)
Identification of bearings of automatic transmission F4A43

We recommend other articles on the topic of Hyundai manuals:

Checking the axial clearance of the rear wheel bearing Hyundai Accent 1 (1994-1999)
Adjusting the timing belt tension Hyundai Getz (2002-2011)
Valve clearance — checking and adjustment Hyundai Sonata 3 (1993-1998)
Table 1.3. Recommended speeds for gear shifting Hyundai Santa Fe 2 (2007-2012, petrol)
Rheostat for adjusting the brightness of instrument lighting Hyundai Tucson 1 (2005-2010)
Adjusting the axial clearance of the starter drive pinion Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet

Elantra 3 (2000-2006)