Removal and inspection
1. Remove the self-tightening nut from the stabilizer bar clevis.
2. Remove the stabilizer bar bracket and fork.
3. Remove the stabilizer bar.
4. Check the stabilizer bar for wear and damage.
5. Check all bolts; they must be in a satisfactory condition, they must not be bent.
Installation
1. Install bushing onto stabilizer bar.
2. Tighten the hub mounting bracket.
3. Use a wrench to secure the stabilizer bar clevis, then install the self-locking nut.
4. Attach the self-locking nut to the stem clevis.
- Standard value (A) — 26-28 mm