1 - busbar for supplying voltage to glow plugs
2 - glow plug
Attention! Installation of glow plugs is carried out in the reverse order of removal.
Examination
1. Check the glow plug resistance between the contact and the glow plug body as shown in the figure. Resistance: 0.25 Ohm.
(The original text is located on the portal: «hyundaibook.ru»)
Warning: Before measuring the resistance, remove any traces of oil from the glow plug, as the glow plug resistance is very low.
2. Check the glow plug supply line for rust.
3. Check the glow plug for damage.