1. Front bumper assembly
2. Bumper beam
Replacement
Note:
To avoid injury when levering with a flat-head screwdriver, wrap the screwdriver with electrical tape. Wear gloves to protect your hands from injury.
Be careful to avoid damage to the bumper and other components.
1. Loosen the bolts securing the upper radiator cover and disconnect the fasteners.
2. Remove the clamps.
3. Loosen the screws securing the side parts of the front bumper, remove the retainer and detach the side parts.
4. Press the locking pin and disconnect the fog lamp connector (A).
5. Remove the front bumper.
6. Installation is carried out in reverse order.
Note:
Make sure the connector is connected correctly.
Replace any damaged fasteners.