Initialization of the sunroof electric motor (Hyundai Tucson LM)

After the battery is discharged or disconnected, or the fuse is replaced or removed, the panoramic sunroof control system must be reset as follows.

1. Turn the ignition key to the "ON" position and close the panoramic sunroof completely.

2. Release the panoramic sunroof control lever.

3. Press and hold the close button for more than 10 seconds until the hatch moves slightly.

4. Release the panoramic sunroof control lever.

5. Press and hold the close button again until the sunroof moves as follows.

A. Tilt -> Opening by moving -> Closing by moving.

Then release the lever.

6. The panoramic sunroof system reset procedure is complete.

Note:

Initialization of the electric motor is necessary in the following cases:

In the process of manufacturing.

If the initial settings are erased due to a power failure.

After manual opening and closing.