2. Remove the drive pulley (A).
3. Remove the camshaft drive toothed belt.
4. Remove the belt tensioner.
5. Remove the back cover (A).
6. Disconnect the oil pan (A) from the cylinder block.
7. Remove the crankshaft gear (B) with the bolt (A).
The publication is borrowed from the website: HYUNDAIBOOK.ru
8. Remove the oil receiver (A).
9. Loosen the mounting bolts (A) and remove the oil pump assembly (B).
10. Loosen the mounting bolts (A) and remove the cover (B) of the oil pump assembly with the inner rotor of the pump.
11. Remove the outer rotor from the oil pump housing.
12. Remove the old sealing cuff from the oil pump housing.
13. Remove the sealing ring (A) from the oil pump housing (B).
14. Unscrew the plug (A) of the pressure reducing valve and remove the seal (B), spring (C) and plunger (D).
15. Remove the oil filter. Replace the filter.