Removal the brake pedal (Hyundai Tucson JM)

1. Remove the lower instrument panel trim,

2. Loosen the four bolts and remove the steering column trim.

3. Remove the brake light switch (A).

4. Disconnect the shift lock cable (automatic transmission).

5. Remove the pin and stud.

6. Loosen the brake pedal bracket mounting bolts and remove the brake pedal assembly.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Tucson 1: Brake system

Brake pedal — check
Brake pedal — device
Adjusting the height of the brake pedal above the floor
Maintenance and adjustments
Brake system — general information

Installing the brake pedal
Vacuum brake booster — device
Checking the operation of the brake booster
Vacuum Hose (Check Valve) — Checking
Vacuum Switch (Diesel Engine Models Only)

We recommend other articles on the topic of Hyundai manuals:

Brake pedal — device Hyundai Accent 1 (1994-1999)
Checking the free travel of the brake pedal Hyundai Elantra 3 (2000-2006)
Checking the free travel of the brake pedal Hyundai Getz (2002-2011)
Brake pedal Hyundai Sonata 3 (1993-1998)
Checking and adjusting the brake pedal Hyundai Santa Fe 2 (2007-2012, petrol)
Checking the free travel of the brake pedal Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet