Replacement
Note:
Removal and installation of a cowl is made together with the assistant.
Be careful not to damage the hood and body.
Use the special tool to remove the fasteners.
1. Remove the front bumper.
2. Turn away bolts of fastening of a mudguard.
3. Turn away fastening screws and disconnect clamps, then remove a decorative lateral overlay (A).
4. Loosen the screws and remove the side mounting bracket (A) front bumper.
5. Remove the side cover (A) wings with a screwdriver.
6. Turn away bolts of fastening and remove a wing (A).
7. Installation is carried out in the reverse order.