Heater and air conditioner controller (manual)
Heater and air conditioner controller (with automatic control)
Replacing the control panel
1. Disconnect the negative battery terminal.
2. Remove the top cover (A) of the console.
3. Remove the lower cover (A) of the instrument panel trim using a screwdriver.
4. Remove the lower switch block (A) from the instrument panel using a screwdriver.
5. Disconnect the connectors, then remove the lower switch assembly (A) from the instrument panel.
6. Loosen the mounting screws and remove the control panel(A).
7. Disconnect the connectors and remove the control panel (A).
8. Installation is carried out in the reverse order of removal.