Removal the oil pump of the G6BA engine (Hyundai Tucson JM)

1. Drain the engine oil.

2. Remove the front right wheel.

3. Remove the right side cover.

4. Remove the front exhaust pipe.

5. Remove the generator.

6. Remove the drive belt.

7. Turn the crankshaft until the white mark on the crankshaft pulley aligns with the mark on the lower cover.

8. Remove the camshaft drive toothed belt.

9. Remove the oil pan and oil receiver.

10. Remove the oil pump housing (A).



11. Loosen the screws (B) and remove the cover (A) of the oil pump housing.



12. Remove the outer and inner rotor of the pump.

13. Unscrew the plug of the pressure reducing valve (A), remove the spring (B) and plunger (C).