Brake pipes — removal and installation (Hyundai Tucson JM)

0

Contents: Removal ⇓ Installation ⇓

Removal

1. Using a spanner (10 mm) (B), disconnect the brake hoses (C) from the brake pipes (A).

1. Using a spanner (10 mm) (B), disconnect the brake hoses (C) from the brake…

Installation

1. Secure the brake hose (A) to the steering knuckle with the bolt (12 mm) (B). Using the connecting bolt (C) and new sealing rings (D), connect the brake hose to the caliper.

1. Secure the brake hose (A) to the steering knuckle with the bolt (12 mm) (B).…

(The publication is borrowed from the website: HYUNDAIBOOK.RU)

2. Connect the brake hose (A) to the brake pipe (D) using the upper brake hose bracket (B) and a new clamp (C).

2. Connect the brake hose (A) to the brake pipe (D) using the upper brake hose…

3. After installation, bleed the brake system to remove air.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Previous

Tucson 1: Brake system

Next

Brake lines — check
Brake pipes — device
Installing a vacuum booster
Removal the vacuum booster
Vacuum Switch (Diesel Engine Models Only)

Master cylinder — device
Master Cylinder — Removal
Master Cylinder — Installation
Brake force distributor
Front disc brakes — device

We recommend other articles on the topic of Hyundai manuals:

Brake pipes and hoses Hyundai Accent 2 (1999-2005)
Brake pipes and hoses Hyundai Elantra 3 (2000-2006)
Brake pipes — removal and installation Hyundai Getz (2002-2011)
Brake drive Hyundai Sonata 3 (1993-1998)
High-mounted brake light Hyundai Santa Fe 2 (2007-2012, petrol)
Parking brake Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet

This site uses cookies to optimize its functionality. By continuing, you agree to our terms.