Interior lighting — removal and installation (Hyundai Tucson JM)

1. Disconnect the negative battery terminal.

2. Remove the lamp glass using a flat-head screwdriver. Replace the lamp if it does not work.

3. Unscrew the two screws, disconnect the connector and remove the upper console.

3. Unscrew the two screws, disconnect the connector and remove the upper…

4. Installation is carried out in the reverse order of removal.

(The material is republished from the web portal hyundaibook.ru)

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Tucson 1: Equipment and devices

Turn signal lamps — removal and installation
Checking the technical condition of the headlight relay
Headlights — Removal and Installation
Lighting system — device
Mirror system

Interior lighting — checking the technical condition
Turn signal and hazard warning lights — checking technical condition
Lighting system circuit breaker — technical condition check
Front fog lights — removal and installation
Checking the technical condition of the front fog light relay

We recommend other articles on the topic of Hyundai manuals:

Interior lighting Hyundai Accent 3 (2005-2010)
Interior lighting Hyundai Elantra 3 (2000-2006)
Interior lighting lamp Hyundai Getz (2002-2011)
Interior lighting Hyundai Sonata 4 (2001-2012, petrol)
Interior lighting lamps Hyundai Santa Fe 2 (2007-2012, petrol)
Combined switch for lighting, headlights and direction indicators Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet