Note. Take care not to damage the inner lining when removing the dashboard elements.
1. Lower the steering column down.
2. Loosen the fastening screws and remove the clamps.
3. Disconnect wiring (A), then remove the instrument panel (IN).
4. To turn away screws of fastening of a guard of devices.
5. Disconnect instrument panel wiring (A), then remove the shield (IN).
6. Remove the center panel cover.
7. Unscrew the fastening screws and remove the clamps.
8. Disconnect the wiring from the switches: alarm (IN), heated rear window (WITH),windshield defroster (D), front fog lights (E). Then remove the center panel (A).
9. To turn away screws of fastening of an audiosystem.
10. Disconnect the radio wiring (A) and antennas (IN), then remove the radio (WITH).
11. Unscrew the screws securing the heater control panel, then remove it (A).
12. Disconnect wiring (A) and guide (IN) from «glove» drawer (WITH).
13. Detach axle (A), then remove the glove box (WITH).
14. Disconnect the negative terminal from the battery.
15. Disconnect the wiring from the passenger airbag module (A), then unscrew the fastening bolts and nuts and remove the instrument panel (IN).
16. Installation is made in reverse order to removal.
Note. When installing the instrument panel, make sure that the wires of the electrical wiring are not pinched.