Rear Washer and Wiper — Removing and Installing Rear Wiper Motor (Hyundai Tucson JM)

1. Remove the cover (A), unscrew the nut (B) and remove the wiper blade. Tightening torque 14-17 Nm.



2. Loosen the nut (B) and remove the handle (A). Tightening torque 10-13 Nm.



3. Remove the wiper motor cover (A).

4. Disconnect the wiper motor connector, then unscrew the 3 nuts and remove the motor.



5. Installation is carried out in the reverse order of removal.