2. To turn on or stop the windshield wiper, move the switch lever to one of the following positions:
- OFF - Off (complete stop).
- INT - Switches on the cleaner in intermittent mode (interval 2-10 seconds).
- LOW - Turns on the cleaner (continuous operation at low speed).
- HIGH - Turns on the cleaner (continuous operation at high speed).
3. In the intermittent operation mode of the "INT" cleaner, the interval of the cleaner's operation can be adjusted within the range of 2 to 10 seconds by rotating the knob on the switch.
4. To turn on the windshield washer, pull the switch lever as shown in the figure. Simultaneously with the operation of the washer, the windshield wiper is automatically turned on (for two or three strokes of the brushes). When you release the switch lever, the washer turns off.
5. To turn on the windshield wiper for one stroke (MIST), press the button on the side of the switch.
