Power side mirrors
Caution: Do not scrape ice off the mirror glass as this may damage the mirror surface. If the ice is preventing the mirror from moving, do not try to remove it by force. To remove ice, use aerosol de-icers, a sponge or cloth soaked in warm water.
1. The side mirrors can be remote controlled when the ignition key is in the "ON" or "ACC".
2. The choice of control of the right or left mirror is carried out by setting the adjustable mirror selection switch to the appropriate position: "R" - right mirror; "L" - Left mirror.
3. Further adjustment of the mirror position is carried out by pressing the corresponding side of the mirror adjustment switch button, as shown in the figure.
4. After the mirror is in the desired position, set the adjustable mirror select switch to the middle position.
5. The mirror can be folded down to avoid damaging it when parking the car. If you press on the mirror with your hand, it will fold.
Note: on models without power mirrors, the mirror position is adjusted by moving the handle to the appropriate position.
Interior rearview mirror with mechanical anti-dazzle device
The car is equipped with an interior rear-view mirror with two positions ("day"/"night"). To select a position "night" (anti-dazzle effect), pull the lever at the bottom of the mirror towards you. This position reduces the glare from the headlights of vehicles behind you at night.
Electrochromic anti-dazzle rear view mirror
Some vehicles have an electrochromic mirror that automatically dims depending on the light to reduce the glare from the headlights of vehicles behind you at night.
Attention: To avoid damage to the internal elements of the mirror, do not spray the cleaning liquid directly onto the surface of the mirror.
Note: Mirror dimming may take longer in cold weather than in warm weather.