Withdrawal
Attach the load handlers to the Hyundai Getz engine lugs and lift so that the weight of the engine is supported by the load handler.
1. Disconnect the engine support bracket from the engine.
2. Turn away bolts of fastening of an elastic support of the engine.
3. Remove the air filter housing mounting bracket.
4. Turn away a bolt of fastening of an arm of a support of a transmission (17 mm).
5. Remove the plugs from the inside of the right wing and unscrew the bolts securing the gearbox support bracket.
6. Remove an arm of a support of a transmission.
7. Disconnect the caster bracket from the subframe.
Installation
Installation is carried out in the reverse order of removal.