Brake pedal — removal and installation (Hyundai Getz 1)

Removal

1. Remove the brake light switch.

2. Remove the cotter pin and push rod axle.



3. Unscrew the flange nuts securing the brake pedal bracket.

4. Remove the brake pedal assembly.

Examination

1. Check the bushing for wear.

2. Check the brake pedal for warping.

3. Check the brake pedal return spring for damage.

4. Check the brake light switch.

• 1) Using an ohmmeter connected to the terminals of the brake light switch, check its conductivity.
• 2) When the plunger is pressed, conductivity should be absent and appear when the plunger is released.

2. Install the brake pedal assembly and secure with flange nuts and bolt.





3. Install the brake light switch.

4. Check and, if necessary, adjust the pedal height and free travel of the brake pedal.